Installing An Additional Server Node To The Server Enclosure - Fujitsu Primergy CX400 S2 Operating Manual

5.3 Installing an additional server node to the
server enclosure
V
CAUTION!
Follow the safety instructions in the chapter
●
on page
I
All nodes are hot pluggable. Therefore, shutting down the multi-node
server system is not necessary.
Figure 3: Removing the server node dummy module
Ê Undo the locking mechanism (1) and pull the server node dummy module
out of the bay (2) of the server enclosure.
CX400 S2
21.
Operating Manual
Hardware installation
"Important information"
39