Imperx BOBCAT User Manual page 261

 During camera RGS or FW upgrade the camera power must be on all the time, and the
process must not be interrupted. If the camera is disconnected or the process canceled,
this will result in a user application firmware corruption. If such event occurs start the
upload process again until completion. If the upgrade process cannot be completed, the
camera will power with the default Factory Firmware so you can start the upgrade
process again. If you need more information, please contact Imperx.
 During DPC, HPC, FFC or LUT upgrade the camera power must be on all the time, and
the process must not be interrupted. If the camera is disconnected or the process
canceled, start the upload process again until completion. If the upgrade process cannot
be completed, the corresponding camera function will not work. This will not affect the
overall camera performance, so you can start the upgrade process again. If you need
more information, please contact Imperx.
Imperx, Inc.
6421 Congress Ave.
Boca Raton, FL 33487
+1 (561) 989-0006
BOBCAT Hardware User's Manual
261 of 265
Rev. 2.0.2
11/20/2012