Table of Contents
Advertisement
4.3.7.7 Luminance Level Threshold
This register sets the desired luminance level to be maintained during AEC or
AGC process.
Address
Data (11:0)
Data (31:12)
4.3.7.8 Luminance Type Selection
This register sets the luminance mode to be used during AEC or AGC process.
The correction algorithm can use the average luminance for the entire frame
or the peak luminance in the frame.
Address
Data (1:0)
Data (31:2)
4.3.7.9 Region of Interest Selection (AOI)
This set of register sets the region of interest to be used during AEC or AGC
process. The correction algorithm can use as a sampling (data collection)
region the entire frame or only a portion (AOI) of it.
AOI Horizontal Offset
Address
Data (11:0)
Data (31:12)
AOI Horizontal Width
Address
Data (11:0)
Data (31:12)
AOI Vertical Offset
Address
Data (11:0)
Data (31:12)
AOI Vertical Height
Address
Data (11:0)
Data (31:12)
Imperx, Inc.
6421 Congress Ave.
Boca Raton, FL 33487
+1 (561) 989-0006
BOBCAT Hardware User's Manual
:
0x0158
<value> – desired luminance level
:
:
N/A
:
0x017C
00 – average luminance
:
01 – peak luminance
10 or 11 – reserved
:
N/A
:
0x0168
:
<value> AOI offset in horizontal direction
:
N/A
:
0x0164
:
<value> AOI width in horizontal direction
:
N/A
:
0x0170
:
<value> AOI offset in vertical direction
:
N/A
:
0x016C
:
<value> AOI height in vertical direction
:
N/A
172 of 265
Rev. 2.0.2
11/20/2012
Advertisement
Table of Contents
