Table of Contents
Advertisement
C.
BOBCAT (GigE or CL models) has a provision for a high-speed custom general
purpose I/O – LVTTL (3.3 Volts) compatible. The maximum output current
NOT
exceed 8 mA, and the maximum input current
This GPIO is not currently enabled. If your application requires such configuration
please contact Imperx for more information.
D.
BOBCAT (CL models ONLY) has a provision for a high-speed custom SPI interface
– LVTTL (3.3 Volts) compatible. The interface can be available via the mini USB
connector on the back of the camera. This SPI interface is not currently enabled. If
your application requires such interface please contact Imperx for more information.
Imperx, Inc.
6421 Congress Ave.
Boca Raton, FL 33487
+1 (561) 989-0006
Custom GPIO (IN/OUT)
Custom SPI Interface
130 of 265
BOBCAT Hardware User's Manual
MUST NOT
MUST
exceed 2.0 mA.
Rev. 2.0.6
11/20/2012
Advertisement
Table of Contents
