Table of Contents
Advertisement
5.7
PARAMETER WINDOWS
Bobcat Cameras have many features that can easily be programmed using the Bobcat
graphical user interface (GUI) or via simple register commands using the Command
Terminal. The main parameter windows are described below.
5.7.1 Video Amp
Video Amp window allows the user to adjust the Analog or Digital gain and offset.
Manual entry and sliders are available for adjusting the individual parameters –
Figure 5.10.
Analog:
Pre Amp Gain: The user can select the preamplifier gain for the camera (the
Digital:
Imperx, Inc.
6421 Congress Ave.
Boca Raton, FL 33487
+1 (561) 989-0006
Figure 5.10 – Video Amp parameter window
The user can set the desired analog gain (0 to 36 dB, 1024
discrete values) and offset (0 to 1023, 1 step increment) for each
channel via the sliders or by entering the desired values.
"Link Gain" and "Link Offset" links the corresponding channels
together (dual tap camera only), and the gain or offset difference
between them will be preserved.
same for both channels). 4 options are possible -3 dB, 0, +3 dB,
and +6 dB. The default Pre Amp Gain value is camera dependent
and it is set for the best camera performance.
The user can set the desired digital gain (1.0x to 3.0x, 0.1x
increment) and digital offset (-511 to +511, 1 step increment) via
the slider or by entering the desired value. The selected value for
gain or offset is applied to both channels.
204 of 265
BOBCAT Hardware User's Manual
Rev. 2.0.2
11/20/2012
Advertisement
Table of Contents
