Table of Contents
Advertisement
Address
Data (23:0)
Data (31:24)
4.3.7.3 Exposure Correction Speed
This register sets the exposure correction speed during AEC. The automatic
exposure control process can set the algorithm convergence speed, i.e. how
long it takes to reach the desired exposure.
Address
Data (1:0)
Data (31:2)
4.3.7.4 Auto Gain Control (AGC)
This register enables the auto gain control.
Address
Data (0)
Data (31:1)
4.3.7.5 Maximum Gain Limit
This register sets the maximum analog gain limit during AGC. The automatic
gain control process will keep the camera analog gain always below the set
level. The Minimum Analog Gain Limit is factory preset.
Address
Data (9:0)
Data (31:10)
4.3.7.6 Gain Correction Speed
This register sets the gain correction speed during AGC. The automatic gain
control process can set the algorithm convergence speed, i.e. how long it takes
to reach the desired gain.
Address
Data (1:0)
Data (31:2)
Imperx, Inc.
6421 Congress Ave.
Boca Raton, FL 33487
+1 (561) 989-0006
BOBCAT Hardware User's Manual
:
0x05B0
<value> – maximum exposure time limit
:
:
N/A
:
0x0174
00 – 1x speed – slow
:
01 – 2x speed
10 – 3x speed
11 – 4x speed – fast
:
N/A
:
0x0154
0 – disable auto gain control
:
1 – enable auto gain control
:
N/A
:
0x0160
<value> – maximum analog gain limit
:
:
N/A
:
0x0178
00 – 1x speed – slow
:
01 – 2x speed
10 – 3x speed
11 – 4x speed – fast
:
N/A
171 of 265
Rev. 2.0.2
11/20/2012
Advertisement
Table of Contents
