Imperx BOBCAT User Manual page 218

Image
Enhancement: are available:
Imperx, Inc.
6421 Congress Ave.
Boca Raton, FL 33487
+1 (561) 989-0006
LUT Select – selects which of the two supported LUTs will be used.
By default LUT #1 is factory programmed with standard Gamma of
0.45. LUT #1 and LUT #2 can be reprogrammed by the user.
Enables the image enhancement processing features. Seven options
Figure 5.19 – Processing window
1. Disable – no enhancement operation will be performed.
2. Single Threshold Binary – single point threshold operation
will be performed. Set the desired threshold level X1 using the
horizontal (bottom) slider (left portion).
3. Dual Threshold Binary – two-point threshold operation will
be performed. Set the desired upper threshold level X2 using
the horizontal (bottom) slider (right portion), and the lower one
X1 – horizontal (bottom) slider (left portion).
4. Dual Threshold Gray – two-point threshold operation with
gray scale mid. values will be performed. Set the desired upper
threshold level X2 using the horizontal (bottom) slider (left
portion), and the lower one X1 – horizontal (bottom) slider
(right portion).
218 of 265
BOBCAT Hardware User's Manual
Rev. 2.0.2
11/20/2012