Imperx BOBCAT User Manual page 184

Address
Data (3:0)
Data (31:4)
4.3.12.11OUT2 Output Polarity
This register sets the polarity (active Low or High) for the OUT2 output.
Address
Data (0)
Data (31:1)
4.3.12.12OUT2 Output Mapping
This register maps the various internal signals to OUT2 camera output.
Address
Data (3:0)
Imperx, Inc.
6421 Congress Ave.
Boca Raton, FL 33487
+1 (561) 989-0006
BOBCAT Hardware User's Manual
: 0x0594
0000 – no mapping
:
0001 – exposure start
0010 – exposure end
0011 – mid exposure
0100 – active exposure window
0101 – H sync
0110 – V sync
0111 – odd/even frame flag
1000 – trigger pulse actual
1001 – trigger pulse delayed
1010 – camera ready
1011 – pulse generator
1100 – strobe #1
1101 – strobe #2
1110 – Software (Bit Toggle)
Others – reserved
: N/A
: 0x0598
0 – active LOW
:
1 – active HIGH
: N/A
: 0x059C
0000 – no mapping
:
0001 – exposure start
0010 – exposure end
0011 – mid exposure
0100 – active exposure window
0101 – H sync
0110 – V sync
0111 – odd/even frame flag
1000 – trigger pulse actual
1001 – trigger pulse delayed
1010 – camera ready
1011 – pulse generator
1100 – strobe #1
1101 – strobe #2
184 of 265
Rev. 2.0.2
11/20/2012