Table of Contents
Advertisement
above) to the following: CHART, DUAL CHART, CHART/COMPASS, CHART/HIGHWAY,
NAVIGATION, HIGHWAY, CELESTIAL, GPS STATUS, DSC LOG, DSC DIRECTORY,
NMEA DISPLAY, NMEA DATA, DEPTH TREND, WIND SPEED TREND, TEMP TREND,
SOG TREND, MARKS/WAYPOINTS, USER C-CARD, FIND , VIDEO INPUT, 50kHz FULL
PAGE, 200kHz FULL PAGE, 50kHz/CHART PAGE or 200kHz/CHART PAGE.
Also when a SI-TEX RADAR antenna is connected (USA O
customized to show Radar pages, RADAR FULL, RADAR/CHART, RADAR OVERLAY and
RADAR/FISH FINDER.
1. To change, momentarily press any of the Soft Keys, then press and hold the Soft Key
you want to customize.
2. A popup window will be shown with the above settings.
3. Move the ShuttlePoint knob up or down to select the desired page.
4. Press [ENT] or move the ShuttlePoint knob to the right to save the page to the selected
Soft Key.
3.8
OTHER SETTINGS IN GENERAL SETUP MENU
The GENERAL SETUP menu has other selections that allow you to customize:
TIME SETUP
DATE FORMAT
COURSE UP/NORTH UP
KEYPAD BEEP
UNITS OF MEASURE
NAV AIDS PRESENTATION Allows the Nav Aids presentation to be drawn using NOAA symbology when US is
DISPLAY COLOR
Page 40
Figure 3.7 - Window options of the selected Soft Key on CPF300i
Selects a sub-menu to allow the time setup. It is possible to choose the Time Zone, select
the Daylight Saving among On/Off/Auto and the Time Format, switching 12 or 24 hours
time format.
Allows choosing date format MM-DD-YY or DD-MM-YY.
Selections are:
North Up : The Top of the page is fixed to North
Course Up: The top of the page is orientated to the direction the vessel is heading.
Allows the beep produced when a key is pressed to be turned on or off.
Units of Measure can be selected for Distance, Speed, Depth, Altitude and Temperature.
selected or International symbols will be used when International is selected. When
selected these functions affect how the icons for Lights, Signals, Buoys and beacons are
displayed.
Changes the background colors of the chart page to enhance the visibility of the screen
depending on the surrounding light conditions. Normal is recommended when the GPS
Chart Plotter is not exposed to the direct sunlight. When this mode is set the maps are
displayed in order to use colors as similar as possible to ones used in the original paper
charts. Classic uses vivid chart colors presentation. NOAA allows setting NOAA paper
chart colors presentation. Night is recommended when the environment is dark in order
to reduce the glare of the display. The GPS Chart Plotter displays maps and screen in
), any Soft Key can be
NLY
WAAS
3D
CPF180i and CPF300i
R
Advertisement
Table of Contents
