Connection Table For Cpf300I; Connection For Cpf300I - Standard Horizon CPF180i Owner's Manual

The CPF180i has to be setup to be able to receive NMEA information from the AIS receiver.
When AIS 38400 is selected the Output Port is disabled.
1. Press [MENU], move the ShuttlePoint knob to highlight SETUP MENU and press [ENT].
2. Move the ShuttlePoint knob to highlight ADVANCED SETUP and press [ENT] or move
the ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight IN/OUT CONNECTIONS and press [ENT] or
move the ShuttlePoint knob to the right.
4. Move the ShuttlePoint knob to highlight PORT1 INPUT and press [ENT] or move the
ShuttlePoint knob to the right.
5. Move the ShuttlePoint knob up/down to select AIS 38400 and press [ENT] or move the
ShuttlePoint knob to the right.
If an AIS receiver is not connected, Port1 Input can be connected to most DSC VHF's for position polling.
The Input and Output baud rate for each port is set using the Advanced Setup>In/Out Connections
menu. For example if Port1 is set for AIS 38400, the Input and Output both operate at 38400 baud.
2.4.2

Connection Table For CPF300i

12VDC Power and NMEA PWR & ACC 1 Cable
Pin Wire Color Description
1 Black Battery Ground &
Common for
NMEA devices
2 Red Battery Positive
3 Green Port3 Input
4 Blue Port1 Input
5 Brown Port1 Output
6 Gray Port2 Input
7 White Port2 Output
8 Yellow Port3 Output
2.4.3

Connection For CPF300i

2.4.3.1 DC Power Connection
CPF300i
Transducer
CPF180i and CPF300i
NOTE
NOTE
Connection Example
Connect to Battery Ground and
and signal ground
Connect to Battery Positive
Connect to Output of NMEA device
Connect to Output of NMEA device
Connect to Input of NMEA device
Connect to Output of NMEA device
Connect to Input of NMEA device
Connect to Output of NMEA device
Optional WAAS GPS
antenna
Additional Comments
Default is NMEA0183
Default is NMEA0183
Default is NMEA0183 with GGA, GLL, RMC,
XTE, DBT, DPT, MTW, VHW sentences
Default is NMEA0183
Default is NMEA0183 with GGA, GLL, RMC
and XTE sentences
Default is NMEA0183 with APA, APB, BOD,
GGA, GLL, RMC and BOD sentences
Red
Black
PWR & ACC 1 Cable
R
Switch
-
+
2A
Battery
Fuse
10-35Vdc
Page 23