Table of Contents
Advertisement
1
Fix Status
2
Cursor coordinates
Speed Over Ground and
3
Course Over Ground
Bearings from Fix to Cursor (if the
4
Fix is NOT received, BRG is empty)
5
Trip Log
6 Distance from Fix to Cursor (if the
Fix is NOT received, DST is empty)
7
Chart Scale
12.0.0 Window Selections
The window on the right side of the Chart page is called the General Window and it may be
edited, customized or even changed to show a highway or compass tape.
FULL CHART (None)
2 LINES SMALL
1. To change, press [MENU]. Move the ShuttlePoint knob to highlight SETUP MENU and
press [ENT].
2. Move the ShuttlePoint knob to highlight GENERAL SETUP and press [ENT] or move
the ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight WINDOWS SETUP and press [ENT] or move
the ShuttlePoint knob to the right.
4. Move the ShuttlePoint knob to highlight CHART PAGE and press [ENT] or move the
ShuttlePoint knob to the right.
5. Select the desired window, HIGHWAY or COMPASS, and press [ENT] or move the
ShuttlePoint knob to the right.
6. Press [CLR] or move the ShuttlePoint knob to exit the menu and show the Chart page.
12.0.1 Customizing the Data Windows
The data fields contained on the General, 1 Line Small/Large and 2 Line Small data windows
can be changed to the following selections:
· SOG
= Speed Over Ground
CPF180i and CPF300i
Figure 12.0a - Example of Charts and general text area in the Single Chart page
GENERAL
Figure 12.0.0 - Data window layout
1 LINE SMALL
WAAS
HIGHWAY
WAAS
1 LINE LARGE
COMPASS
Page 87
R
1
2
3
4
5
6
7
WAAS
3D
Advertisement
Table of Contents
