Color Settings; Scrolling Speed; White Line; Fish Symbols - Standard Horizon CPF180i Owner's Manual

17.11.0

Color Settings

Allows you to change the color of the Fish Finder display from Blue (default), White, Black,
Gray scale.
17.11.1

Scrolling Speed

Controls the rate the Fish Finder scrolls and updates the Fish Finder display.
17.11.2

White Line

Controls how the bottom type (hard or soft) is shown on the display. When the White Line
is Off the bottom return will display as red. When the White Line is On it can be used to
determine bottom hardness.
17.11.3

Fish Symbols

Controls the graphical representation of underwater-suspended targets.
Echo
Icon + Echo
Icon + Echo + Depth : shown as arches with the Fish icon and relative depth values
Echo + Depth
Icon
Icon + Depth
17.11.4

A-Scope

Shows the real time display of the echo from the bottom.

17.12 TRANSDUCER SETUP

This menu allows you to calibrate the speed through the water, water temperature and the
keel/prop offset of the transducer.
Page 134
Figure 17.11.0 - White and Blue background examples
: shown as arches (echoes)
: shown as arches with the Fish icon
: shown depth values
: shown as Fish icons without the arches
: shown as Fish icons and their relative depth values (shown accord-
ingly to currently selected depth unit)
CPF180i and CPF300i
R