Fish Finder Setup Menu; Page Selection - Standard Horizon FF520 Owner's Manual

4. FISH FINDER SETUP MENU

1. From the full page fish finder page, press the [MENU] key to show the Fish Finder Setup
menu.
2. From the Chart page, to access this menu:
a. Press [MENU]. Move the ShuttlePoint knob to SETUP and press [ENTER].
b. Move the ShuttlePoint knob to FISH FINDER SETUP and press [ENTER].
The following paragraphs describe the Fish Finder Setup menu sub-options.
4.0 PRESETS
Allows selection of the following preset modes: FISH, CRUISE, AUTO RANGE, BOTTOM
LOCK and MANUAL. The default values are:
Fish : Auto Gain, Auto Range, Gain Offset = 10, Shift = 0
Cruise : Auto Gain, Auto Range, Gain Offset = 0, Shift = 0
Auto Range : Manual Gain, Auto Range, Shift = 0
Bottom Lock : Auto Gain, Bottom Lock Range Mode, Gain Offset = 0, Shift = 10m (30Ft)
Manual : Manual Gain, Manual Range
For Gain and Gain Offset settings please see the Sensitivity menu (Par. 4.4).
For Range and Shift settings see the Range menu (see Par. 4.3).
4.1

PAGE SELECTION

The Page Selection menu allows you to adjust the Fish Finder display page to your
preference, sizing the Chart and Fish Finder Fish finder page (see also Pra. 3.1.0a).
FF520
Figure 4 - Fish Finder Setup menu
NOTE
Page 25