Table of Contents
Advertisement
If the selected language is not available on cartographic data, English language is used.
If you have accidentally selected a language and are unable to select a language that is
understandable, perform the following procedure:
a. Select the Chart page.
b. Press [MENU] two times, move the Shuttlepoint knob to highlight the first (top) selection in the
menu and press [ENT].
c. A language window will be shown, press [ENT], select your language and press [ENT].
3.6
SELECTING PAGES USING SOFT KEYS ON CPF300i
The Soft Keys located under the LCD on the CPF300i are used to select the pages quickly
without the need to go into the menu. The default pages are VIDEO, NAV, HIGHWAY,
CELESTIAL, CHART and LIST.
When one of the Soft Keys is pressed popup windows above each Soft Key are shown with
the key description. Press the Soft Key with the desired page description and the GPS Chart
Plotter will change to that page.
CHART
GPS STATUS
WAAS
3.7
CUSTOMIZING THE SOFT KEYS ON CPF300i
The Soft Keys (CPF300i) can be individually customized from the default pages (discussed
CPF180i and CPF300i
Figure 3.5 - Language Selection menu on CPF300i
NAVIGATION
NMEA DISPLAY
3D
Figure 3.6 - Screen display pages
NOTE
WARNING
HIGHWAY
WAAS
3D
Chart 200KHz
CELESTIAL
WAAS
3D
Display example with RADAR connected
R
WAAS
3D
Page 39
Advertisement
Table of Contents
