Customizing The Fish Finder Menu Selection; Soft Keys (Cp175C And Cp1000C); Customizing The Soft Keys - Standard Horizon CP1000C Owner's Manual

3.1.0a Customizing the Fish Finder menu selection
The default setting of the FISH FINDER selection in the Main Menu is 200kHz Full page,
however this may be changed to show images as shown in the Figure 3.1.0a.
From the Chart page:
1. Press [MENU], select the Fish finder page and press [ENTER] or move the ShuttePoint
knob to the right.
2. Press [MENU], move the ShuttePoint knob down to select PAGE SELECTION and
press [ENTER] or move the ShuttePoint knob to the right.
3. The PAGE SELECTION window will be shown. Move the ShuttlePoint knob up/down or
left/right to select the desired display and press [ENTER].
3.1.1

Soft Keys (CP175C and CP1000C)

1. Locate and press the Soft Key labeled 200kHz Full.
3.1.1a Customizing the Soft Keys
All of the Soft Keys can be customized to select the Fish Finder displays to which you want
quick access to one or up to 3 Fish Finder FULL DISPLAY pages:
FF520
Figure 3.1.0a - Page Selection menu
Figure 3.1.1 - Fish Finder page selection by Soft Keys
Page 19