Menu Selection For Cp180/Cp180I/Cpv350; Customizing The Fish Finder Menu Selection; Soft Keys For Cp175C/Cp1000C/Cpv350 - Standard Horizon Ff520 Owner's Manual

3. Press [ENTER] to select the Fish Finder Setup menu.
3.1.0a Menu selection for CP180/CP180i/CPV350
1. From all pages except the Fish Finder page, press [MENU].
2. Move the ShuttlePoint knob to highlight FISH FINDER.
Figure 3.1.0a - Example of Fish Finder page selection by [MENU] on CP180/CP180i
3. Press [ENT] to select the Fish Finder Setup menu.
3.1.1

Customizing the Fish Finder menu selection

The default setting of the FISH FINDER selection in the Main Menu is 200kHz Full page,
however this may be changed to show images as shown in the Figure 3.1.1.
From the Chart page:
1. Select the Fish Finder page (see previous Par. 3.1.0 or Par. 3.1.0a).
2. Press [MENU], move the ShuttlePoint knob down to select PAGE SELECTION and
press [ENTER] or move the ShuttlePoint knob to the right.
3. The PAGE SELECTION window will be shown. Move the ShuttlePoint knob up/down or
left/right to select the desired display and press [ENTER].
3.1.2

Soft Keys for CP175C/CP1000C/CPV350

1. Press any of the soft keys to show the key discriptions, then press the 200kHz Full Soft
Key.
FF520
Figure 3.1.1 - Page Selection menu
Page 19