Laguna Bay Spas Spa Owner's Manual page 29

Topside Controls
When servicing your spa, always manually power "OFF" the GFCI.
On occasion, error codes appear when there is not a problem with the spa, but to
indicate the spa needs the opportunity to reset. After severe weather, which may
include power surges that you do not notice, your spa may display an error code.
You should try resetting your spa before calling technical support to report a
problem. Allowing the spa to reset will often solve the problem. To reset your
spa, manually power "OFF" the GFCI, wait 40 minutes and manually turning the
GFCI "ON".
There is a battery in the spa controls which allows the spa to hold all of the
program settings while the power is disconnected. It will not power the spa.
However, during prolonged periods of power outages, the water in the spa may
freeze and damage the spa. If you experience prolonged periods without power,
please call technical support at 877-722-4097 for instructions.
29