Setting The Water Temperature - Laguna Bay Spas Spa Owner's Manual

AUX Button:
If your spa is equipped with optional SurroundWave Audio
AUX
System, this button controls the built in audio components. Press
this button to turn SurroundWave "ON". AUX will be displayed
on the LED. Press this button again to turn SurroundWave "OFF".
The AUX button turns the built in speakers "ON" and "OFF". All other
functions, like volume and the tract playing, are controlled by the device plugged
into to the SurroundWave Audio System.
If your spa is not equipped with SurroundWave Audio System, pressing this
button will do nothing.
Up and Down Buttons:
The "UP" arrow button and the "DOWN" arrow
button allow you to increase and decrease the water
temperature. The LED will display the current
temperature of the water in the spa. Pressing the
"UP" arrow allows you to increase the water temperature. Pressing the "DOWN"
arrow allows you to decrease the water temperature.
When you press either the "UP" or "DOWN" arrow button, the temperature on
the LED will flash. While the LED display is flashing, press the "UP" arrow to
increase the water temperature until the flashing number displays the desired
temperature. After 6 seconds, the LED will stop flashing. The current water
temperature will be displayed on the LED.
The "HEATER" icon will appear on the LED display and remain there until
the new temperature is reached.
To decrease the water temperature, press the "DOWN" arrow. The current water
temperature on the LED display will flash. While the temperature is flashing,
press the down arrow until the desired temperature is reached. After 6 seconds,
the LED will stop flashing and the water temperature will decrease to the set
temperature.
Your Laguna Bay Spa is designed to retain heat and maintain water temperature
efficiently and economically. It is not equipped with a cooling device. When
the outdoor temperature is high, the water in your spa may be higher than a
cool water temperature setting. During warm weather, if the water temperature
in your spa is higher than a cool temperature setting, the spa is functioning as
it is designed. If you want to cool the water in your spa, remove the spa cover
allowing the water to cool. Do not leave the spa unattended while the cover
is removed. You can also drain some of the water from the spa and add cool
water to the correct level for your spa model, making sure you adjust your water
chemistry to recommended levels.
26
Topside Controls

Setting the Water Temperature