Spa Controls - Laguna Bay Spas Spa Owner's Manual

Pump 1 Button:
Pump 1 is a two speed pump. Press this button once to turn the pump
on Low Speed. The pump 1 "LOW" icon will be displayed on the
LED. Press the Pump 1 Button again to turn the pump onto High
speed.
The Pump 1 "HIGH" icon will be displayed on the LED Press the
1
button a third time to turn Pump 1 "OFF".
When the spa is heating, the pump will operate on low speed until the
water reaches the correct temperature.
Your Laguna Bay Spa is programmed to automatically turn the jets off after 25
minutes.
Pump 2 Button:
This button controls Pump 2. Press this button once to turn the
pump on. The Pump 2 icon will be displayed on the LED. Press it
2
again to turn the pump off. Your Laguna Bay Spa is programmed to
automatically turn the jets off after 25 minutes.
Pump 3 Button:
If your spa is equipped with 3 pumps, this button controls Pump
3. Press this button once to turn the pump on. The Pump 3 icon
3
will be displayed on the LED. Press it again to turn the pump off.
Your Laguna Bay Spa is programmed to automatically turn the jets off after 25
minutes.
If your spa has only two pumps, pressing this button will do nothing.
Light Button:
Press this button controls the lights. Press this button once to turn the
lights "on". The "LIGHT" icon will be displayed on the LED. If your
spa is equipped with a multi-color lamp, pressing this button a second
time will stop the rotation of the colors, locking it on the color of your choice,
when the button is pressed at the same time the color is displayed. Press the
button again to turn the lights off.
If your spa is equipped with optional perimeter lighting, the perimeter lighting
works in tandem with the under water light.
Your Laguna Bay Spa is programmed to automatically turn the lights off after 2
hours.
Topside Controls

Spa Controls

25