Laguna Bay Spas Spa Owner's Manual page 21

Energy saver spa equipment
Table of Contents

Advertisement

risk of drowning. Keep hair, clothing and children away from the suction drains
when using the spa. Do not use the spa if they need to be replaced. You should
avoid contact with the suction drain covers when the GFCI is powered "on".
force all of the flow into the other section. Turning the diverter valve all the way
to the other side will reverse the flow of water to the opposite side of the spa.
The Air Valve
is a smaller rotating valve on the topside of the spa that looks like
the Diverter Valve, but is smaller in size. It is used to increase or decrease air
flow through the jets. Increasing air flow creates "bubble action" as the water
enters the spa. The air valve rotates right and left. Do not over turn the air valve
which has built in "stops". Forcing the valve to turn past it's built in "stop" will
damage the spa.
When the air valve is positioned in the center,
moderate "bubble action". When the air valve is turned to one direction, or
closed, there is less air flow and fewer bubbles. If the air valve is turned fully to
the opposite direction, the air valve is fully open creating the most bubbles.
The Waterfall Valve
decrease flow thru the waterfall. The waterfall
valve rotates right and left. Do not over turn
the air valve which has built in "stops". Forcing
the valve to turn past it's built in "stop" will
damage the spa.
When the waterfall valve is placed in the
center,
there is moderate flow through the
waterfall. If the valve is turned all the way in
one direction, there is no flow through the
waterfall. If the valve is turned all the way in
the opposite direction, the flow is increased to
allow maximum flow through the waterfall.
Getting Started
The Diverter Valve
topside of the spa used to control flow of the water
between sections of the spa controlled by each
pump in the spa. The diverter valve rotates right
and left. Do not over turn the diverter valve which
has built in "stops". Forcing the valve to turn past
it's built in "stop" will damage the spa.
When the diverter valve is positioned in the
center,
each area of the spa controlled by a diverter valve.
Turning the diverter valve all the way to one side
will restrict the water flow from one section and
is used to increase or
is a large rotating dial on the
water flow will be spread evenly throughout
there is moderate air flow with
21

Advertisement

Table of Contents
loading

Table of Contents