True CS900 Owner's Manual page 25

CHAPTER 2: ASSEMBLY INSTRUCTIONS
ELLIPTICAL ASSEMBLY STEPS (continued):
Optional Power Supply Installation (continued):
*These steps are only required if this unit will be paired with a touchscreen console or 15"TFT Console.
b) Snip zip tie and expose cable
bundle.
Reconnect
c) Switch power cable connection
here
from self-generated connection
Figure C-1 to Power Supply
connection shown in Figure C-2.
Disconnect
here
Figure C-1 Figure C-2
d) Install Power supply
connections: Connect 110V input
plug and output DC barrel
Zip Ties
connector.
e) Zip tie Power Supply onto back
frame and reinstall back covers
making sure that cable will not be
pinched.
Barrel connection
110V Input
connection
Truefitness.com / 800.426.6570 / 636.272.7100 21