True CS900 Owner's Manual page 18

CHAPTER 2: ASSEMBLY INSTRUCTIONS
ELLIPTICAL ASSEMBLY STEPS (continued):
STEP 6: Attach Upper Body Cardio Arms:
* upper arms are labeled "L" for Left and "R" for Right.
a) Install each upper arm with 4
M8x20mm bolts and 4 washers
using a 6mm hex key.
Hardware Required (Bag 6):
8 M8x20mm Bolts
8 Lock Washer
4 M8x20mm Bolts
4 washers
b) Attach the Cardio Arm Covers
using 4 M5x8mm screws per side.
Hardware Required (Bag 6):
8 M5x8 Screws
4 M5x8mm
Screws
STEP 7: Attach Pedal Tubes:
a) Use 2 M10x80mm bolts and 2
M10 Nuts to attach Pedal Tubes.
Make sure that Pedal Tubes are
centered on the rollers on the
Crankshaft before tightening the
bolts.
Hardware Required (Bag 7):
2 M10x80mm Bolts
2 M10 Nuts
Truefitness.com / 800.426.6570 / 636.272.7100 14