True CS900 Owner's Manual page 14

CHAPTER 2: ASSEMBLY INSTRUCTIONS
ELLIPTICAL ASSEMBLY STEPS (continued):
STEP 1: Assemble Pedestal to Base:
a) Remove 3 screws in order to
remove inner shroud from both
inner sides.
b) Use 2 people to slide the
Pedestal straight down onto the
Base and be careful to not pinch
the wires on the right side of the
base.
c) To secure the Pedestal to the
Base, use 2 M10x70mm bolts on
the inside and 4 M10x20mm
bolts on the front and back.
Do this for both sides.
*Do NOT pinch wires!
Hardware Required (Bag 2) :
4 M10x20mm Bolts
2 M10x70mm Bolts
Front and Back
Bolts
Inside Bolts
M10x20mm
Bolts
Truefitness.com / 800.426.6570 / 636.272.7100
Remove inner
shrouds by removing
3 screws per side.
Pedestal
M10x70mm
Bolts
10