True CS900 Owner's Manual page 19

CHAPTER 2: ASSEMBLY INSTRUCTIONS
ELLIPTICAL ASSEMBLY STEPS (continued):
STEP 7: Attach Pedal Tubes (continued):
b) Attach the Front Pedal Tube
Covers using 8 M5x12mm screws.
Hardware Required (Bag 7):
8 M5x12mm Screws
STEP 8: Attach Console Mast:
a) Slide Console cables through
Route Cables Through
Console Mast (and attach Mast
Console Mast
using 4 M8x 20mm bolts).
Hardware Required (Bag 8):
4 M8x20mm Bolts
4 M8x20mm
bolts
STEP 9: Attach Console:
a) Use 2 M4x16 screws to attach
Front Console Cover
front console cover to mast, being
careful to not pinch wires.
2 M4x16mm
Hardware Required (Bag 9):
screws
2 M4x16 Screws
Truefitness.com / 800.426.6570 / 636.272.7100 15