True CS900 Owner's Manual page 17

CHAPTER 2: ASSEMBLY INSTRUCTIONS
ELLIPTICAL ASSEMBLY STEPS (continued):
STEP 4: Attach Draw Bars (continued):
*Shrouds are marked "L" for left and "R" for right on inside of part
a) Attach middle covers with 2
M3x12 screws
M5x12 and 3 M3x12 screws.
b) Repeat this step for both sides
Hardware Required (Bag 4):
6 M3x12 Screws
4 M5x12 Screws
M5x12 screws
STEP 5: Attach Side Arms:
a) Connect Cardio Arm Heart Rate
Cable.
b) CAREFULLY slide Side Arm
into Pedestal and tuck the Heart
Rate Cable into the metal tube.
Make sure to not pinch the Heart
Rate Cable wires.
c) Use 2 M8x12mm bolts on each
side to tighten the Side Arms into
the underside of the Pedestal.
Hardware Required (Bag 5):
4 M8x12bolts
M8x12 bolts
Truefitness.com / 800.426.6570 / 636.272.7100 13