True CS900 Owner's Manual page 13

CHAPTER 2: ASSEMBLY INSTRUCTIONS
ELLIPTICAL ASSEMBLY STEPS:
Measure Doorways:
Measure all doorways, hallways and stairwells to make sure that the 34" frame can fit through them. If it will not fit, move
all parts to the final location and assemble machine in that location. If the machine needs to be placed on its side, keep the
left side Styrofoam attached to the Base to help avoid damaging the plastic covers.
Do not insert fork from fork truck in this
location. There are exposed parts that
Elliptical base can be set
on its LEFT side, but
ONLY with the attached
Styrofoam underneath it.
Please Note When Moving The Elliptical:
can be damaged.
Truefitness.com / 800.426.6570 / 636.272.7100 9