Using A Web Browser - AMX Enova DVX-2100HD Operation/Reference Manual

Using a Web Browser

You can access the configuration settings for the presentation switcher by using a web browser. (AMX
supports Internet Explorer 7.0 for Windows and Mozilla Firefox 3.6 users.) The system configuration pages
are available by entering the IP address of the NetLinx master into the location bar of your web browser.
Entering your IP address into your web browser opens the Main WebControl page (FIG. 52).
FIG. 52 Main WebControl page
The configuration screens appear in a pop-up window separate from the Main
WebControl screen. Make sure the pop-up blocker in your web browser is disabled.
Perform these steps to access the configuration settings:
1.
Open a web browser.
2.
Enter the IP address of the presentation switcher in the location bar of the web browser. If you do not
know your switcher's IP address, see the Locating the IP Address of the Presentation Switcher section on
page 50.
WebControl requires that you install the latest version of the Adobe Flash Player
plug-in for your browser. If your browser does not have the Flash Player plug-in
installed, you will be prompted to install it.
The Main WebControl page opens (FIG. 52).
3.
Use the Device options menu at the top of the screen to select the <DEVICE #> - DVX-2100HD. The
Configuration page opens in a separate pop-up window (FIG. 54).
Enova DVX-2100HD 6x2 All-in-One Presentation Switcher Operation/Reference Guide
Audio/Video Configuration
Device menu
49