Enova Avx-400 Twisted Pair Presentation Switcher; Overview - AMX AVX-400 Operation/Reference Manual

Enova AVX-400 Twisted Pair Presentation
Switcher

Overview

The Enova AVX-400 Twisted Pair Presentation Switcher (FG1350-01) is a four input, multi-format active presentation
switcher with auxiliary line level audio input. The AVX-400 (FIG. 1) is a twisted pair switcher with basic projector/
display control via RS-232, but with external control of the switcher via RS-232 or AxLink. This presentation switcher
incorporates the following:






FIG. 1
Enova AVX-400 Twisted Pair Presentation Switcher (front and rear panels)
The presentation switcher presents the respective output for the VGA/RGB, component, and composite video sources.
All sources remain in their native formats and resolutions. The selected video source is presented with its related audio,
and mixed with the auxiliary line input. Master volume of the program sound is available for adjustment by external
control.
The system is suitable for use within a 1-50m range (3.2'-165'), however, you can possibly work outside this range by
using a low skew cable (do not use nanoskew cable). There is control for video gain and video equalization for each
input to compensate for cable length and allow optimization of each source. The switchers contain a stereo 10W per
channel built-in audio amplifier with 7-band graphic equalization.
AVX-400 Enova Twisted Pair Presentation Switcher Operation/Reference Guide
External serial or AxLink control
Projector or display control via RS-232
Integrated multi-format Cat5 audio/video switcher
Audio mixer with an auxiliary line input facility
Audio volume and tone control
Built-in audio amplifier

Enova AVX-400 Twisted Pair Presentation Switcher

Front panel
Rear panel
1