Managing Ds6000 And Ds8000 Flashcopy; Creating A Remote Flashcopy On An Ds6000 Using Ds Cli - IBM System storage DS6000 Series Redbook

Example 28-11 Establishing Global Mirror using DS CLI
dscli> mkpprc -remotedev IBM.1750-1300247 -type gcp -tgtread -mode full 0801:0601
Date/Time: 9 November 2005 2:45:53 IBM DSCLI Version: 5.1.0.204 DS: IBM.2107-7503461
CMUC00153I mkpprc: Remote Mirror and Copy volume pair relationship 0801:0601 successfully created.
dscli> lspprc 0801
Date/Time: 9 November 2005 2:46:04 IBM DSCLI Version: 5.1.0.204 DS: IBM.2107-7503461
ID State Reason Type
==================================================================================================
0801:0601 Copy Pending -
dscli> mkremoteflash -dev IBM.1750-1300247 -conduit IBM.2107-7503461 -record -nocp 0601:0602
Date/Time: 2 November 2005 21:49:00 IBM DSCLI Version: 5.1.0.204 DS: IBM.1750-1300247
CMUC00173I mkremoteflash: Remote FlashCopy volume pair 0601:0602 successfully created. Use the
lsremoteflash command to determine copy completion.
dscli> mksession -lss 08 -volume 0801 90
Date/Time: 9 November 2005 2:57:18 IBM DSCLI Version: 5.1.0.204 DS: IBM.2107-7503461
CMUC00145I mksession: Session 90 opened successfully.
dscli> lssession 08
Date/Time: 9 November 2005 2:57:55 IBM DSCLI Version: 5.1.0.204 DS: IBM.2107-7503461
LSS ID Session Status Volume VolumeStatus PrimaryStatus
===========================================================================================================
08 90 Normal 0801
dscli> mkgmir -lss 08 -session 90
Date/Time: 9 November 2005 2:58:19 IBM DSCLI Version: 5.1.0.204 DS: IBM.2107-7503461
CMUC00162I mkgmir: Global Mirror for session 90 successfully started.
ddscli> showgmir 08
Date/Time: 9 November 2005 2:58:42 IBM DSCLI Version: 5.1.0.204 DS: IBM.2107-7503461
ID
Master Count
Master Session ID
Copy State
Fatal Reason
CG Interval (seconds)
XDC Interval(milliseconds) 50
CG Drain Time (seconds)
Current Time
CG Time
Successful CG Percentage
FlashCopy Sequence Number 0x4370CB7E
Master ID
Subordinate Count
Master/Subordinate Assoc

28.6 Managing DS6000 and DS8000 FlashCopy

The establishment of a FlashCopy pair on a DS6000 using the DS8000 DS GUI is no different
than establishing a DS8000 FlashCopy pair (see 9.6, "FlashCopy management using the DS
SM" on page 87. The establishment of a FlashCopy pair on a DS8000 using the DS6000 DS
GUI, is again no different than establishing a DS6000 FlashCopy pair. For the DS CLI, you
connect directly to the relevant SMC or HMC, so it is also not different.

28.6.1 Creating a remote FlashCopy on an DS6000 using DS CLI

It is also possible to use DS CLI to create a remote FlashCopy on a DS6000 where the
source PPRC device is a DS8000 and vice versa. In Example 28-12, we connected to a
DS8000 using the DS CLI. We determined that there are established paths from LSS 08 on
the DS8000 to LSS 06 on the DS6000. We created a Metro Mirror pair from volume 0801 on
SourceLSS Timeout (secs) Critical Mode First Pass Status
Global Copy 08
Join Pending Primary Copy Pending Secondary Simplex True
IBM.2107-7503461/08
1
0x90
Running
Not Fatal
0
30
11/09/2005 02:59:58 EST
11/09/2005 02:59:58 EST
100
IBM.2107-7503461
0
-
Chapter 28. Interoperability between DS6000 and DS8000
unknown Disabled
SecondaryStatus
False
FirstPassComplete
427