IBM System storage DS6000 Series Redbook page 187
Copy services with ibm system z
Hide thumbs
Also See for System storage DS6000 Series:
- Redbooks (406 pages) ,
- Attachment manual (298 pages) ,
- Introduction and planning manual (119 pages)
Table of Contents
Advertisement
ICK04029I DEVICE IS IN SUSPENDED PPRC STATE
PRIMARY CONTROL UNIT INFORMATION
SERIAL
NUMBER
SSID LSS
------- ---- --- ----------------
AAVCA
0002 00
ICKDSF - MVS/ESA
DEVICE SUPPORT FACILITIES 17.0
SECONDARY CONTROL UNIT INFORMATION
SERIAL
NUMBER
SSID LSS
------- ---- --- ----------------
AAVCA
0003 01
PATHS:
SERIAL
NUMBER
SSID LSS
------- ---- --- ---------------- ---- ---- ---- --
1ST: AAVCA
0003 01
2ND: ....... .... ... ................ .... .... .... 00
3RD: ....... .... ... ................ .... .... .... 00
4TH: ....... .... ... ................ .... .... .... 00
S*=PATH STATUS
00=NO PATH
01=ESTABLISHED
02=INIT FAILED
03=TIME OUT
04=NO RESOURCES AT PRI
05=NO RESOURCES AT SEC
06=SERIAL# MISMATCH
07=SCU SSID MISMATCH
ICKDSF - MVS/ESA
DEVICE SUPPORT FACILITIES 17.0
08=ESCON LINK IS OFFLINE
09=ESTABLISH FAILED BUT WILL RETRY AGAIN WHEN CONDITIONS CHANGE
0A=SYSTEM ADAPTER HAS A HOST PATH ALREADY ESTABLISHED
0B=PATH CANNOT BE CONNECTED IN THE SAME CLUSTER
10=CONFIGURATION ERROR
11=CANNOT ESTABLISH PATH BETWEEN CKD AND FBA
12=LSS AND LINKADDRESS MISCOMPARE
13=ESTABLISHED FIBRE CHANNEL PATH
14=FIBRE CHANNEL PATH LINK DOWN
15=FIBRE CHANNEL PATH RETRY EXCEEDED
16=FIBRE CHANNEL PATH SECONDARY ADAPTER NOT PPRC CAPABLE
17=FIBRE CHANNEL PATH SECONDARY ADAPTER NOT AVAILABLE
18=FIBRE CHANNEL PATH PRIMARY LOGIN EXCEEDED
19=FIBRE CHANNEL PATH SECONDARY LOGIN EXCEEDED
ICK02206I PPRCOPY QUERY FUNCTION COMPLETED SUCCESSFULLY
ICK00001I FUNCTION COMPLETED, HIGHEST CONDITION CODE WAS 0
17:48:02
06/07/05
QUERY REMOTE COPY - PATHS
WORLD WIDE
NODE NAME
500507630EFFFCA0
WORLD WIDE
NODE NAME
WORLD WIDE
NODE NAME
500507630EFFFCA0
TIME: 17:48:02
PATH SAID DEST S*
1
0000 0100 13
TIME: 17:48:02
Chapter 14. Metro Mirror interfaces
163
Advertisement
Table of Contents
