IBM System storage DS6000 Series Redbook page 468

Determining DS6000 WWNN with DS CLI
In Example 29-5, we show how to display the WWNN of a Storage Image using the lssi
command.
Example 29-5 Determine the WWNN of a DS6000
dscli> lssi
Date/Time: 3 November 2005 1:05:50 IBM DSCLI Version: 5.1.0.204
Name ID
============================================================================
- IBM.1750-1300247 IBM.1750-1300247 511
Determine the WWNN of the ESS 800 with the ESS Specialist
To determine the WWN of the ESS 800 with the ESS Specialist:
1. Point your browser to the IP address of either cluster of the ESS 800.
2. On the opening panel, click ESS Specialist .
3. Using the prompt, log on to the ESS Specialist with a ESS Specialist user ID and
password.
4. On the welcome panel, you see the WWNN as shown in Figure 29-10. Write it down.
Figure 29-10 Using ESS 800 Specialist GUI to display the ESS 800 WWNN
Determining the WWNN of the ESS 800 using the ESS CLI
If you have the ESS CLI installed on a PC, then you can use the list server command to
display the ESS 800 WWNN.
Note: This is not the DS CLI. ESS CLI is a separate software package that you can get
from your IBM Service Representative if you do not already have it.
An example of the command syntax is shown in Example 29-6. The advantage of this
technique is that you can copy and paste the output.
Example 29-6 Using ESS CLI to display the ESS 800 WWNN
C:\Program Files\ibm\ESScli>esscli -u storwatch -p specialist -s 10.0.0.1 list server
Tue Nov 01 03:28:59 EST 2005 IBM ESSCLI 2.4.0
Server
-----------------------------------------------------------------------
2105.22399
444
IBM System Storage DS6000 Series: Copy Services with IBM System z
Storage Unit
Model Mfg WWN
800 013 5005076300C09517
Model WWNN State ESSNet
500507630EFFFE16 Online Enabled
CodeEC Cache NVS Racks
2.4.3.79 32GB 2GB 1