IBM System storage DS6000 Series Redbook page 466

Figure 29-7 Select source I/O ports
9. In the next panel (see Figure 29-8), you select, for each source I/O port from the DS6000,
a target I/O port on the ESS. When you are finished, click Next .
Figure 29-8 Select target I/O ports
10.In the next two panels, you are asked whether you want built a Consistency Group and to
verify the information that you entered during the process. Verify the information and click
Finish to establish the PPRC paths.
Figure 29-9 on page 443 shows the two PPRC paths that we have for LSS 06. To manage the
established paths (for example, delete path), you can select the path you want to manage and
then select the appropriate action you want to perform from the menu.
442
IBM System Storage DS6000 Series: Copy Services with IBM System z