D
Receiving a Test Acknowledgement Call
When a Test Acknowledgement Call is received:
➥ The alarm sounds for 2 minutes.
➥ "RCVD TEST ACK" pops up. The LCD backlight blinks for
2 minutes.
Push [ALARM OFF] to stop the alarm and the blinking
q
backlight.
• If [ALARM OFF] is not pushed within 2 minutes, the next screen
may appear, depending on the received Category.
Push a softkey to select your desired action.
w
[EXIT]
➥ Push to return to the normal operating mode.
• The transceiver exits the DSC mode.
• "
" continues to blink and the Call is stored in the Received
Call Log.
Transmitted Call log
■
The transceiver automatically stores up to 50 transmitted
calls, and the logs can be used as a supplement to your log-
book.
Enter "TX CALL LOG" in the DSC CALLS menu.
q
➪
DSC Calls
➪
MENU
(Push [MENU])
(Rotate Dial, then push [ENT].)
Push [
Y] or [Z] to select the desired item, then push
w
[ENT].
Rotate Dial to scroll the DSC message contents.
e
To delete the displayed DSC message, push [DEL].
r
• The confirmation screen appears, then push [OK] to delete.
Push [EXIT] to return to the normal operating mode.
t
DSC OPERATION
Transmitted Call Log
Rotate
7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
57