Adjusting The Volume Level; Adjusting The Squelch Level - Icom IC-M323 Instruction Manual

4
BASIC OPERATION

Adjusting the volume level

■
The volume level can be adjusted with [VOL/SQL](Dial).
Rotate [VOL/SQL](Dial), or push [VOL/SQL](Dial) one or
q
more times to display the volume adjustment screen.
Rotate [VOL/SQL](Dial) to adjust the volume level.
w
• The transceiver has 20 volume levels and OFF.
• If no key operation is performed for about 5 seconds, the trans-
ceiver sets the selected volume level, and returns to the normal
mode.
Push [ENT] to set the level, and exit the volume adjust-
e
ment mode.
• Push [CLEAR] to cancel.
The desired function can be assigned to Dial. See page 70
for details.
14

Adjusting the squelch level

■
The squelch level can be adjusted with [VOL/SQL](Dial).
In order to receive signals properly, as well as for the scan
to function effectively, the squelch must be adjusted to the
proper level.
Push [VOL/SQL](Dial) one or more times to display the
q
squelch adjustment screen.
Rotate [VOL/SQL](Dial) to adjust the squelch level.
w
• The transceiver has 11 squelch levels: OPEN is completely
open; 10 is tight squelch; 1 is loose squelch.
• If no key operation is performed for about 5 seconds, the trans-
ceiver sets the selected squelch level, and returns to the normal
mode.
Push [ENT] to set the level, and exit the squelch adjust-
e
ment mode.
• Push [CLEAR] to cancel.
The desired function can be assigned to Dial. See page 70
for details.