D Dsc Data Output - Icom IC-M323 Instruction Manual

7
DSC OPERATION
D DSC Data Output
Select an option for the DSC Data Output function.
When receiving a DSC call, this function makes the trans-
ceiver send the DSC data from its NMEA Output port to a
connected device.
Enter "DSC DATA OUTPUT"
q
➪
MENU
(Push [MENU])
Rotate Dial to set the DSC Data Output function to "All Sta-
w
tion," "List Station" or "OFF," then push [ENT].
• Push [BACK] to cancel and return to the DSC Settings menu.
All Station : Outputs the call from any vessel from the
NMEA Output port.
List Station : Outputs the call from any vessels listed on
the Individual ID screen.
OFF : Does not output any call to the external
equipment.
Push [EXIT] to return to the normal operating mode.
e
62
in the DSC Settings menu.
DSC Settings ➪ DSC Data Output
(Rotate Dial, then push [ENT].)
D Alarm
Set the Alarm function ON or OFF, depending on the Cat-
egory or Status.
Enter "ALARM"
q
MENU
(Push [MENU])
Rotate Dial to select the status, then push [ENT].
w
• Push [BACK] to cancel and return to the DSC Settings menu.
• "Safety," "Routine," "Warning," "Self-Terminate" and "Discrete" are
selectable. (default: ON )
(default)
Rotate Dial to set the Alarm setting to "ON" or "OFF."
e
Push [EXIT] to return to the normal operating mode.
r
in the DSC Settings menu.
➪ DSC Settings ➪
Alarm
(Rotate Dial, then push [ENT].)