Icom IC-M323 Instruction Manual page 16

4
BASIC OPERATION
D Channel group selection
There are preprogrammed international channels for the
IC-M323. For U.K. version transceivers, there are prepro-
grammed U.S.A. channels in addition to International chan-
nels. In addition to the International channels, there are pre-
programmed ATIS channels for the Dutch, and DSC channels
for the German version transceivers.
Except for the Europe version, you can select a channel group
suitable for your operating area, as described below.
Push [MENU].
q
Rotate Dial or push [
w
then push [ENT].
Rotate Dial or push [
e
then push [ENT].
10
∫]/[√] to select "Radio Settings," and
∫]/[√] to select "CHAN Group," and
Rotate Dial or push [ ∫]/[√] to select the desired channel
r
group, and then push [ENT].
• U.S.A., (USA) International (INT), ATIS or DSC
may be selected, depending on the version.
Push [EXIT] to exit the Menu screen.
t
Push [ ∫](CH) or [√](CH) to select a channel.
y
• Pushing [Y]/[Z] on the microphone selects only Favorite chan-
nels.
• "DUP" appears when a duplex channel is selected.
• "A" appears when a simplex channel is selected.
Channel group icon appears
When the U.S.A. channel
group is selected.
*
channel groups