D Transmitting An All Ships Call - Icom IC-M323 Instruction Manual

7
DSC OPERATION
D Transmitting an All Ships call
All ships, that have DSC transceiver, use Channel 70 as their
'listening channel.' When you want to announce a message to
these ships within range, use the 'All Ships Call' function.
Enter "ALL SHIPS CALL" in the DSC CALLS menu.
q
➪ DSC Calls
MENU
(Push [MENU])
Select a desired category, using Dial or [
w
Dial or [ENT].
• The selectable category may differ, depending on the pro-
grammed setting. Ask your dealer for the selectable categories.
Select a desired traffic channel, using Dial or [
e
push Dial or [ENT].
• The selected channel is displayed.
34
➪ All Ships Call
(Rotate Dial, then push [ENT].)
Y]/[Z], then push
Y]/[Z], then
A confirmation screen appears.
r
• Confirm the call contents.
Push [CALL] to transmit the All Ships call.
t
• If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
After the All Ships call has been transmitted, the following
y
screen is displayed.
Announce the message using the microphone.
u
After the announcement, push [EXIT] to return to the nor-
i
mal operating mode.