Transmitted Call Log - Icom IC-M323 Instruction Manual

D Receiving a Test Acknowledgement Call
When a Test Acknowledgement Call is received:
The alarm sounds for 2 minutes.
➥
"RCVD TEST ACK" is displayed. The backlight blinks for
➥
2 minutes.
Push [ALARM OFF] to stop the alarm and the blinking
q
backlight.
• Even if you do not push [ALARM OFF], the alarm stops after 2
minutes, and then the screen in step w is displayed.
Push a softkey to select your desired action.
w
[EXIT]
Push to return to the normal operating mode.
➥
• The transceiver exits the DSC mode.
• " " continues to blink and the Call is stored in the Received
Call Log.

■ Transmitted Call log

The transceiver automatically stores up to 50 transmitted
calls, and the logs can be used as a supplement to your log-
book.
Enter "TX CALL LOG" in the DSC CALLS menu.
q
➪ DSC Calls ➪
MENU
(Push [MENU].) (Rotate Dial, then push [ENT].)
Push [ Y]/[Z] to select the desired item, then push [ENT].
w
• Push [BACK] to return to the previous screen.
• Push [EXIT] to return to the normal operating mode.
Rotate Dial to scroll the DSC message contents.
e
To delete the displayed DSC message, push [DEL].
r
• The confirmation screen is displayed, then push [OK] to delete.
Push [EXIT] to return to the normal operating mode.
t
DSC OPERATION
Transmitted Call Log
Rotate
7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
59