Receiving Dsc Calls - Icom IC-M323 Instruction Manual

Receiving DSC calls

■
D Receiving a Distress Call
When a Distress Call is received:
The emergency alarm sounds for 2 minutes.
➥
"RCVD DISTRESS" pops up and the LCD backlight
➥
blinks.
Push [ALARM OFF] to stop the alarm and the blinking
q
backlight.
Push a softkey to select your desired action.
w
[IGN]
➥ Push to return to the normal operating mode.
• The transceiver exits the DSC mode.
• By pushing [PTT], the transceiver also exits the DSC mode.
• " " continues to blink and the Call is stored in the Received
Call Log.
[INFO]
➥ Push to display the Received call information. (p. 58)
[ACPT]
Push to accept the call.
➥
And then, push [CH 16] to switch the operating channel
to Channel 16, and then monitor it, as a coast station
may require assistance.
• If you haven't pushed [CH 16] within 10 seconds, the operat-
ing channel automatically switches to Channel 16. (p. 61)
7
DSC OPERATION
Push
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
45