Icom IC-M323 Instruction Manual page 60

7
DSC OPERATION
D Receiving a Position Report Call
When a Position Report Call is received:
➥ The alarm sounds for 2 minutes.
➥ "RCVD POSITION REPORT" pops up. The LCD backlight
blinks for 2 minutes.
Push [ALARM OFF] to stop the alarm and the blinking
q
backlight.
• If [ALARM OFF] is not pushed within 2 minutes, the next screen
may appear, depending on the received Category.
Push a softkey to select your desired action.
w
54
[EXIT]
➥ Push to ignore the Call and return to the normal operat-
ing mode.
• The transceiver exits the DSC mode.
• " " continues to blink and the Call is stored in the Received
Call Log.
[INFO]
➥ Push to display the Received call information. (p. 58)