Left Handle Switches - HYOSUNG GV125S Owner's Manual

LEFT HANDLE SWITCHES

1
①
CLUTCH LEVER
The clutch lever is used for
disengaging the drive to the
rear wheel when starting the
engine or
transmission gear.
Squeezing
disengages the clutch.
Use the clutch correctly.
Otherwise, the clutch may be
worn quickly.
② " " "PASS" SWITCH
Press the "PASS" switch to
oper ate the head lamp high
beam for using when pass.
With the ignition switch in the
"ON" position, push the "PASS"
2 3 4
6 5
shifting
the lever
switch to operate the head
lamp high beam.
This switch does not work
when the dimmer switch is
set to "
③DIMMER SWITCH
head lamp light.
■ "
beam comes on.
The high beam indicator
lamp also comes on.
the
■ "
beam comes on.
Set the dimmer switch "
when other vehicle is running
in front or against.
④ HAZARD WARNING
SWITCH
"
l lamps and indicator lamp
will flash simulta- neously
when the switch is turn on with
the ignition switch in "
— 23 —
" position.
Change the direction of the
"：The head lamp high
"：The head lamp low
"：A l l f o u r t u r n s i g n a
"
"