Air Cleaner Element - HYOSUNG GF125 Service Manual

2-5 PERIODIC MAINTENANCE AND TUNE-UP PROCEDURES

AIR CLEANER ELEMENT

Clean Every 3000km
If the air cleaner is clogged with dust, intake resistance
will be increased with a resultant decrease in power out-
put and an increase in fuel consumption. Check and clean
the element in the following manner.
● Remove the left frame cover.
● Remove the screw and take out the cover.
● Separate the polyurethane foam element from the ele-
ment frame.
● Fill a washing pan of a proper size with nonflammable
cleaning solvent. Immerse the element in the cleaning
solvent and wash it clean.
● Squeeze the cleaning solvent out of the washed ele-
ment by pressing it between the palms of both
hands.
● Immerse the element in motor oil, and squeeze the oil
out of the element leaving it slightly wet with oil.
NOTE:
Do not twist or wring the element because it will tear or the individ-
ual cells of the element will be damaged.
CAUTION:
Inspect the element carefully for rips, torn seams, etc. If any dam-
age is noted, replace the element.
� Non-flammable cleaning solvent
� Motor oil
�
�