Using Bi-D Adjustment; Making Adjustment With Bi-D Adjustment - Epson DLQ-3500II User Manual

Note:
It might not be possible to retrieve the printer status during printing. In this situation, click the EPSON
Status Monitor 3 button in the Utility tab, and use the printer with the status window left open.

Using Bi-D Adjustment

This utility tool allows you to make adjustment when you find a misalignment in vertical line.

Making adjustment with Bi-D Adjustment

To make Bi-D Adjustment, follow the steps below.
Caution:
!
❏ Do not turn off the printer while the printer is printing adjustment pattern. Doing so may
cause the printer to store incorrect settings. If you turned off the printer during the adjustment
process, restart Bi-D Adjustment again.
❏ Serial connection is not supported.
❏ Make sure that the printer's status is ready before making Bi-D Adjustment.
❏ If Bi-D Adjustment is not printed properly, set the printer's font setting to default and try
again.
1. Open the Utility menu, then click the Bi-D Adjustment icon. To find out how to open the Utility
menu, see "Using the Printer Driver" on page 55. The Bi-D Adjustment window appears.
2. Click Next.
DLQ-3500II/DLQ-3500IIN
Printer Software
User's Guide
70