Configuring An Ip Address - GeoVision GV-NVR System Lite User Manual

Networking surveillance

Hide thumbs Also See for GV-NVR System Lite:

Table of Contents

Getting Started

3.7 Configuring an IP Address

The GV-NVR System Lite has a default IP address to connect to the GV-IPCAM H.264

automatically. However, you can still configure the IP address for network connection

arrangement. To configure the IP address, follow the steps below:

1. On the GV-Desktop, click the Programs button, and then select Control Panel.

Figure 3-22

2. Type the ID and password. The default ID and password are "0000". The Control Panel

window appears.

Figure 3-23

Table of Contents

Do you have a question about the GV-NVR System Lite and is the answer not in the manual?