Adding The External Hard Drive To The Recording Path - GeoVision GV-NVR System Lite User Manual

Networking surveillance

Hide thumbs Also See for GV-NVR System Lite:

Table of Contents

3.6 Adding the External Hard Drive to the Recording Path

Before you start recording to the external hard drive, you need to add the formatted external

hard drive to the recording path.

1. On the GV-Desktop, click the Programs button, and select Hot Swap HDD Tool. The

MediaMan Tools window appears.

Figure 3-20

2. Right-click the hard drive in the MediaMan Tools window, select Add for recording, and

then select the storage group from the drop-down list. The Storage 1 is created by default.

3. Click OK to automatically configure the hard drive to the recording path.

4. In the MediaMan Tools window, if the hard disk drive is successfully added to store data,

its Status field will display "Standby".

5. To add another formatted hard disk drive for storage, repeat the above steps.

Figure 3-21

Table of Contents

Do you have a question about the GV-NVR System Lite and is the answer not in the manual?