Table of Contents
Advertisement
3.3 Basic Installation
This section describes basic installation required to program and operate the GV-NVR
System Lite.
1. Connect the speakers to the GV-NVR System Lite.
2. Connect the microphone to the GV-NVR System Lite.
3. Using the USB cables, connect a keyboard and a mouse to the GV-NVR System Lite.
4. Connect the GV-USB Dongle to the GV-NVR System Lite.
5. Using the DVI cable, connect the computer monitor to the GV-NVR System Lite.
6. Using the RJ-45 cable, connect a switch or a hub to the GV-NVR System Lite.
7. Connect the GV-IPCAM H.264 and the unit to the network or Internet. See 3.4 Installing
GV-IPCAM H.264.
8. Using the supplied power adapter and power cord, connect the GV-NVR System Lite to
the power outlet.
The power of the GV-NVR System Lite will be automatically turn on once the GV-NVR System
Lite is connected to the power outlet. When the unit is on, the power LED turns blue.
8
Figure 3-4
Advertisement
Table of Contents
Need help?
Do you have a question about the GV-NVR System Lite and is the answer not in the manual?
Questions and answers