GeoVision GV-NVR System Lite User Manual page 30

Networking surveillance
Hide thumbs Also See for GV-NVR System Lite:
Table of Contents

Advertisement

3. Click Scan Camera to detect all the IP cameras on the same LAN. After the scanning
process is finished, this dialog box appears.
4. Double-click the IP cameras to add them to the list.
5. Click the listed camera, and select Change preview codec, Change record codec or
Change record resolution to change the Live View codec or Recording codec and
Recording resolution.
Note: For these changes to be applied through the GV-NVR System Lite, it is required that
the GV-IPCAM H.264 uses the default username and password that are admin. To modify
the username and password, you can select Change Setting.
6. Click the listed camera, and select Display position to map the IP camera to a channel on
the GV-NVR System Lite.
7. The Status column now should display "Connected". Click OK to exit.
22
Figure 3-29
Figure 3-30

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GV-NVR System Lite and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents