Table of Contents
Advertisement
After the power is on, the GV-NVR System Lite will run a series of self-tests, and later series
of messages may be displayed as the various hardware and software subsystems are
activated. Then the GV-System Software (Multicam Surveillance System) will load
automatically and bring you to the main screen with 4-channel display.
Note:
1. The monitor you use must be capable of having a screen resolution of 1280 x 1024 and
display color of 32 bits.
2. The GV-NVR System Lite has the default IP address of 192.168.0.200 (subnet mask of
255.255.255.0). The GV-IPCAM H.264 has the default IP range of 192.168.0.201 to
192.168.0.204 (subnet mask of 255.255.255.0). The automatic connection between
GV-NVR System Lite and GV-IPCAM H.264 only works when they are using the default IP
addresses.
3
Getting Started
9
Advertisement
Table of Contents
Need help?
Do you have a question about the GV-NVR System Lite and is the answer not in the manual?