2. Click the
button located at the lower left corner. The login screen appears.
Figure 5-4
3. Enter the IP address of your GV-NVR System Lite, port value (default value is 8866), a
username and a password. Then click OK.
4. Once the connection is established, the live video will appear.
Playing Back the Recordings
To play back the recordings, follow these steps:
1. Start the WeBCam Server with the following two functions enabled.
A. Select the Run ViewLog Server option on the General tab.
Figure 5-5
36
Need help?
Do you have a question about the GV-NVR System Lite and is the answer not in the manual?