Mac Filter - D-Link DIR-620 User Manual

DIR-620 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual

MAC Filter

On the Firewall / MAC filter page, you can configure MAC-address-based filtering for computers
of the router's LAN.
To specify a new address for the MAC filter, click the Add button.
On the opened page, enter the MAC address of the device from the router's LAN in the MAC
address field. To choose a device connected to the router's LAN at the moment, select the relevant
value from the drop-down list located to the right of the field (the field will be filled in
automatically). Then select the Deny value from the Action drop-down list and click the Change
button.
To remove an address from the list of MAC addresses for filtering, select the line with the relevant
MAC address. On the opened page, click the Delete button.
Figure 110. The Firewall / MAC filter page.
Figure 111. The page for adding an address for the MAC filter.
Page 133 of 159
Configuring via Web-based Interface